Cs-9815 two component silicone potting adhesive cs-9815

It is mainly used for filling and sealing the electrical components, circuit boards, LED lights and outdoor lighting lamps that require adhesive adhesion, playing the role of insulation, sealing, water-proof and moisture-proof.
* because the colloid contains diluent materials, the colloid placed for a long time will be layered. Before use, mix the A / B components evenly, and then put them into the mixing tank according to the mass ratio of 10:1.
* pour the mixed rubber into the device to be potted. Generally, vacuuming is not necessary. If conditions permit, it is recommended to refill after vacuuming. This product is room temperature curing type. The curing speed of adhesive has no great relationship with curing temperature, but has a great relationship with the proportion content of agent B. the larger agent B is, the faster the curing speed is (it is suggested that the adjustment range of agent B is 100:7-100:12). Generally, it takes about 8 hours to cure at room temperature.
* Unused rubber materials shall be sealed for storage. The storage period is 6 months (25 ℃). The mixed rubber should be used up once to avoid waste.
* this product is not dangerous, but it is not allowed to enter or eyes.
* transportation: no domestic (cn-gb), International (IMO, IATA, UN) regulations. Non dangerous goods.

Characteristic:
* component A and B of this product are colorless and transparent liquid. The two components can be preserved for a long time before mixing.
* this product has good adhesion, insulation, elasticity, corrosion resistance, weather resistance and other characteristics. After curing, the gel can be used in a wide temperature range (- 60-200 ℃). During the curing process, ethanol molecules are released, which will not cause corrosion to PC & nbsp; (poly carbon), PP, ABS, PVC, copper wire and other materials. It has good adhesion to most electronic accessory materials (except PP and PE).
* good waterproof, moisture-proof and anti-aging properties.
* meet the requirements of EU ROHS directive.